NOTE: Occasionally we do limited runs of Aluminum Blue & Red Anodize get them when you can. Top shock holes are intentionally larger for ease of set up. Nine upper shock mounting holes in each shock tower to make any type of setup easy.
#Element rc ecto full#
Optimized full suspension compression front and rear when tuned correctly. Note: Do not use a flat skid, use the stock skid. RPRC Servo/Winch Tray or Element Enduro OEM servo tray will be required for use with the SCX10-II platform. This is a very fun and capable build!Ĭhassis is NOT a belly dragger. The Phoenix Trans, Skid, Links Axles and Drive Shafts fit the Interceptor Chassis perfect. Use the Rock Pirates RC Panhard Mount that is provided with the Interceptor Chassis and turn it to the inside. VS410 Phoenix Build Notes: We recommend you use the Rock Pirates RC Element Servo Tray it fits perfect and clears everything nicely.
#Element rc ecto install#
Install the transmission skid so the rear screw holes of the skid align with the second holes from the rear on the Interceptor Chassis. Use the stock transmission skid and remove the side guide pins. The steering linkage will need to be shortened a little by cutting a couple threads off each end of the steering rod. NOTE: Flip to the inside for SCX10-II, flip to the outside for Element & Base Camp builds.īase Camp Build Notes: You will need to use the Rock Pirates RC SCX10-II Servo/Winch Tray and Plank Mini Battery Tray. This part fits the following vehicles: Element RC Enduro Enduro Gatekeeper Rock Crawler/Trail. This small-scale, 4-wheel drive crawler comes equipped. Element Rc Enduro Ecto Body Set Yellow EL42160. A blast to drive Whether it's outside on the trail or in the comfort of your own living room, there's no doubt this little rig will overcome the challenge. Stainless steel custom RPRC pan hard bar mount. Element Enduro 1/24 Trail Truck, ECTO RTR. Small spacers will be needed on the rear crossmember if using a Hardline Bed. Note: Bolt up the transmission skid first (stock) then pinch the rails to install servo tray and rear crossmembers.
Then add the spacer/washers needed to the support crossmember to be installed under the battery tray.Īvailable in high quality Stainless Steel (9.9 oz) or Anodized Aircraft Aluminum (3.6 oz). When using the Stainless-Steel rails, bolt up the skid first, then pinch the rails and install the battery tray crossmember. NOTE: INTERCEPTOR CHASSIS Also Fits the Axial Capra! We Highly Recommend the Rock Pirates RC 6 Pack Crossmembers for this build.
#Element rc ecto upgrade#
Rock Pirates RC (RPRC) upgrade parts are also compatible with the Interceptor Chassis. The chassis can also be used on RTR trucks except Elements with IFS & ECTO. This model is aimed towards RC rock climbing enthusiasts, and its packed to the brim with innovative performance. The Interceptor Chassis is designed to allow Axial SCX10-II, Element, Axial Base Camp or VS410 to bolt into a TRUE HIGH PERFORMANCE flat rail chassis. The most versatile and capable chassis on the market. Aimed towards the serious RC rock crawler enthusiast, the new Enduro Ecto Trail Truck RTR is packed full of performance features that are sure to impress. FRONT SHOCK TOWERS ELEMENT SENDERO SPORT EDITION (SE)
0 kommentar(er)
